Author: Loren Nelson

Posted on by

Reduce the Blind Spot Reduce the Collisions

Most of the road accidents today are caused by poor blind spot mirrors. In fact, many reports have recently been brought up and numerous researches are on going to find a better solution for the road carnage. Referring to the research results held by UDT University, common causes of traffic accidents are due to blind spot issues. The research also concluded that blind spot mirrors should be accurate and precise which was absolutely contrary to the traditional blind spot mirrors.

All in all, many products are being produced with enhancements but the inaccuracy problems are still prominent. Basing on local crime statistics, only a 10% decrease was achieved in the total traffic accidents that were being reported in 2010. This simply explains that traffic problems are still prominent.

Therefore, we need to take action by choosing high quality blind spot mirrors. This could be the best step to start with. MaxiView blind spot mirrors are considerably effective in terms of these circumstances. In fact, this type of mirror is capable of magnifying the image of vehicles to thrice the actual size. Rotate capabilities of up to 360 degrees of the mirror allows you to access the blind spot easily. In fact, you can view the coming vehicles towards you and be able to maneuver appropriately to avoid possible collision.

Another great thing about the MaxiView blind spot mirror is the fact that it can fit on any type of vehicle. The motorists can therefore maximize the view of their side mirror as preferred. Being located on the top corner of the side mirror, one can easily adjust them and roll over at the preferred vision. Apart from that, it has an adhesive bond, which provides a strong hold for both blind spot mirrors. Wherever the road may take you, the MaxiView blind spot mirror will remain attached until you choose to transfer them from one vehicle to another.

Posted on by

The most dangerous move to make on our nation’s highways

Changing lanes on a multi-lane highway is the most dangerous maneuver on the road. Changing lanes is even more dangerous when your mirrors say you are clear to go but out of nowhere, from your blind spot, a car suddenly appears right in your path. If your reflexes are good enough you may be able to quickly change your mind and swerve back into you original lane, but in many cases a collision occurs. If you are in dense peak hour traffic this may cause further collisions and even a pile-up, where multiple cars collide end to end.

In order to safely change lanes the driver needs to be sure that there is nothing lurking in his blind spot without having to take his eyes off the road by turning his head.

Rear quarter blind spots are believed to be the most common of the blind spots, the areas near the rear of the vehicle on either side. Vehicles driving in adjacent lanes slightly behind you can fall into your blind spot and may be missed from your field of vision as a result in poor visibility if you are just using normal mirrors.

A solution to avoiding collisions in this situation is to invest in and install MaxiView Blind Spot Mirrors, giving you peace of mind and making you a safer driver. These handy mirrors can be installed at home by means of a durable adhesive strip and is placed on the top upper corner of the side mirrors of your vehicle. A 360 degree swivel pivot allows the mirror to be adjusted to suit any person. The image is not distorted or reduced in size like the fish eye or bubble mirror accessories that are available on the market. The MaxiView Blind Spot Mirror gives you a realistic image, using state of the art engineered lenses which are shatterproof, fog resistant and 100% anti-glare.

For under $30 you can make this potentially dangerous lane changes with confidence and peace of mind, without endangering yourself or others.

Posted on by

Drive safer by eliminating your blind spot

It is recommended to check in the area called the blind spot before changing lanes. If you are using fish eye or bubble eye blind spot mirrors, you probably are aware of the fact that it is difficult to effectively eliminate the blind spot and whats more is that most of them are not adjustable. You cannot rotate them and have a 100% clear vision to see what is coming at you. There are adjustable ones as well but again the worst part is the difficulty to adjust the maximum focal point and this often results in distraction especially when you are driving. It may work out fine today but what about tomorrow or the next day? Remember mirror adjustment is something we have to do almost every day.

Have you considered there is a product available that is superior to the traditional and inferior bubble and fish eye blind spot mirrors? The MaxiView blind spot mirror is easy to adjust and doesn’t need re- adjustment every day? You can easily adjust the focal point and swivel the mirror at 360 degrees without affecting its functionality. And when you’re driving, you can easily adjust the visibility without having to go through the difficulty of doing it. It is specifically placed at the top corner of the existing side mirror where the sky is usually reflected – this ensures that there is no way it will block or obscure your vision.
The effectiveness of the MaxiView blind spot mirror lies in the fact that it can be adjusted such that the focus is up to three times larger than the original size and allows you to easily see the vehicle approaching behind you thereby reducing the opportunity of collision especially when lane changing. MaxiView blind spot mirrors are also 100 % glare and shatter proof so you can be confident that you’re safe even if you travel at night.

Posted on by

Can you afford not to have a blind spot mirror?

Changing lanes is quite common when you are driving which is why you must have MaxiView Blind Spot Mirrors installed. The blind spot is one of the common causes of collisions when changing lanes. Traffic authorities have advised motorists and vehicle owners to eliminate blind spots using blind spot mirrors. One recommended brand is the MaxiView blind spot mirror.

Unlike traditional mirrors, the MaxiView blind spot mirrors have a lot to offer. One common problem faced with traditional mirrors is installation. Some are very complex and difficult to install. Not only that; once these inferior mirrors are installed you will be faced with a number of problems such as poor visibility and difficulty in adjustment. On the other hand, you will never face these problems with MaxiView blind spot mirrors which is why they are so highly recommended.

MaxiView Blind Spot Mirrors are easy to attach and the strong adhesive allows for strong bonding which prevents them from falling off. What is more is that it is placed such that you can get a complete view of the road and actual distance to the car behind. And most importantly, you can rotate up to 360 degrees. Another great thing about MaxiView blind spot mirrors is that you will have clear vision even at night. Its ability to let you have a glare free view at night is something which makes night driving preferable. These are some of the advantages that actually serve as an edge over fish eye or bubble mirrors, especially when one finds trouble in getting a clear view of the vehicles behind.

MaxiView blind spot mirrors are quite affordable. You may find some traditional ones as being cheaper than the superior MaxiView blind spot mirrors but it will not be long before you will have to shop for new ones because they are broken or non-functional. This is not the case with MaxiView Blind Spot Mirrors. They are cost-effective, reliable and durable.

Posted on by

MaxiView Blind spot Mirrors Expose the Dangers On Our Roads

Blind spot mirrors are invaluable car accessories. They eliminate places or spots from a driver’s view normally hidden. These spots are normally so small that most drivers tend to forget to check them which lead to near misses even collisions when doing road manoeuvres. We have to be clear, near misses can be dangerous as well as they can also lead to secondary collisions caused by defensive manoeuvres. This is especially true for larger vehicles since they tend to have bigger blind spots, sometimes as large as two cars or a house, making the margin for error even steeper.

Imagine a large 14-wheeler truck on a large highway, small vehicles could easily fit in its blind spot potentially in danger should the truck driver make lane changes or big turns, thinking it’s alright because he was unable to see the hidden vehicles. If the truck had a blind spot mirror he could have seen the vehicle/s and been able to give ample warning and clearance before acting, effectively preventing a totally avoidable mishap. Superior blind spot mirrors like MaxiView would not only have shown the hidden vehicles but also given the driver a better grasp of how far or how large the oncoming vehicles are, preventing him from second guessing and acting prematurely. MaxiView blind spot mirrors do this by providing a more realistic image than the traditional bubble eye blind spot mirror.

MaxiView is also great for night driving especially in fog prone areas with its anti-glare and fog resistant materials. MaxiView is also fully adjustable helping the driver to adjust the mirror to a more comfortable and efficient position. Enabling the driver to see without additional effort or in-cabin movement, will help to avoid those dangerous split second actions when the driver should have been focused in front of the vehicle. MaxiView Blind Spot Mirrors are truly invaluable especially for avoiding dangers on our roads.

Posted on by

Drive with confidence with a MaxiView blind spot mirror

It really should be compulsory to have MaxiView Blind Spot Mirrors installed on all vehicles on todays’ roads. After all, how else would we be able to curve the alarming collision rate that occurs each year due to blind spot error? Most vehicle owners today are using the traditional bubble or fish eye mirrors. There are different types of these mirrors available nowadays and if drivers simply purchase the first one that comes along, they may be completely unaware of the fact that it can turn into a disaster easily with a wrong choice. Just because a blind spot mirror complies with the safety rules and regulations doesn’t mean they can be relied upon that they are all the same quality product and have the same level of effectiveness. Many severe accidents are being reported and the cause is poor visibility of blind spot mirror. Almost half of road accidents are directly a result of low quality product.

But there is a solution. MaxiView blind spot mirrors are one reliable product available on the market and manufactured to suit any type of vehicle. This means motorcycles; trailers, trucks, buses, tractors and cars can all have the MaxiView blind spot mirrors attached effortlessly to the existing side mirrors of the vehicle. In fact, it is highly recommended considering the fact that it is manufactured with high quality material and offers a number of advantages.

One thing that makes it different from the others is that you can rotate it even at 360 degrees without having to compromise on seating position, driver height or vehicle make. With a fog proof, shatter proof and dummy proof installation guide, buying, installing and using MaxiView blind spot mirrors is an all-round enjoyable and effortless experience.

Posted on by

Reduce the incidence of damage and collisions using blind spot mirrors

There is a section towards the rear of most makes and models of car, which creates a blind spot for the driver, viewing from the side mirrors and rear vision mirror. A driver needs to turn their head around to check this blind spot. This can be a dangerous thing to do when you are traveling alongside other vehicles in moving traffic; however it is not safe to change lanes without checking as there may be a car in your blind spot.

As many accidents on our roads happen while lane changing, it is safe to say that the presence of blind spot mirrors on all cars would greatly reduce the road toll. Most vehicles do not come with blind spot mirrors and various stick on versions have been tried over the years but were not widely reviewed.

The MaxiView Blind Spot Mirror on the other hand, uses the latest technology and is a very successful and popular product. It is constructed with an optically engineered lens to produce a clear reliable image and it is also shatterproof, fog resistant and 100% glare proof.

The MaxiView Blind Spot Mirror is easily installed single handed, following the step by step instructions. It attaches to the existing side mirrors of any vehicle in the upper corner, out of the way of the regular side mirror image. It is attached using an adhesive strip designed for all weather and temperatures and features a 360 degree ball swivel adjustment so that the mirror can be fine-tuned to suit varied body height. The MaxiView Blind Spot Mirror has a stylish appearance with a black finish which suits even the most luxurious of cars.

One you start using the MaxiView Blind Spot Mirror you will be surprised how much better you drive with the peace of mind that you have invested under $30 on something which may reduce your likeliness of damage and collision.